ADVANCED CHARGING SOLUTION FOR SMART VEHICLES

 

Elevate your vehicle's power management with the Victron Orion-Tr Smart 12/12-30A isolated DC-DC charger. Ideal for modern vehicles with Euro 5 and Euro 6 smart alternators, this charger ensures a controlled and complete battery charge, enhancing the performance of both service and starter batteries. With built-in Bluetooth connectivity, you can seamlessly monitor and adjust settings via the VictronConnect app, ensuring optimal performance with ease.

 

Engineered for precision, the Orion-Tr Smart charger features a configurable 3-stage charge algorithm and smart alternator compatibility, offering adaptive charging for both lead-acid and lithium batteries. Whether navigating through rugged terrains or cruising on smooth highways, remain confident that your vehicle's batteries are protected and fully charged.

 

BLUETOOTH ENABLED

Effortlessly monitor and configure your DC-DC charger with the VictronConnect app. This feature provides real-time access to data, warnings, and firmware updates—all from your smartphone or tablet.

 

ADAPTIVE CHARGING

Experience intelligent charging with the adaptive 3-stage charge algorithm, which adjusts based on battery type and discharge levels. This ensures maximum efficiency and battery longevity for both deep and shallow discharges.

 

SMART ALTERNATOR COMPATIBILITY

Designed for Euro 5 and Euro 6 engines, this charger detects engine activity to prevent unwanted battery discharge. It offers precise control with adjustable battery settings.

 

HIGH TEMPERATURE PROTECTION

The charger automatically reduces output current at elevated temperatures, protecting your system from overheating and ensuring continuous, reliable performance.

 

WHAT'S IN THE BOX

  • 1 x Victron Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC Charger
  • Preassembled DC connection cables

5 YEAR MANUFACTURERS WARRANTY

  • Bluetooth Enabled: Easily manage settings and updates via the VictronConnect app.
  • Adaptive Charging: Efficient 3-stage algorithm tailored for lead-acid and lithium batteries.
  • Smart Alternator Compatibility: Protects against unwanted discharge in modern vehicles.
  • High Temperature Protection: Automatically reduces output to prevent overheating

PRODUCT SPECIFICATIONS - VICTRON ORION DCDC ISOLATED

MODEL Victron Orion-Tr Smart 12/12-30A (360W) Isolated
Input voltage range 10-17 V
Under voltage shut down  7 V
Under voltage restart  7.5V
Nominal output voltage 12.2V
Output voltage adjust range 10-15 V
Output voltage tolerance +/- 0.2 V 
Output noise  2 mV rms
Cont. output current at nominal output voltage and 40 °C 30A
Max. output current (10 s) at nominal output voltage minus 20 % 40A
Short circuit output current 60A
Cont. output power at 25 °C 430W
Cont. output power at 40 °C 360W
Efficiency 87%
No load input current < 80 mA
Standby current Less than 1 mA 
Can be used as power supply Yes, output voltage can be set with Bluetooth
Galvanic isolation  200 VDC between input, output and case 
Operating temperature range -20 to +55 °C   (derate 3 % per  °C above 40 °C) 
Humidity Max. 95 % non-condensing
DC connection Screw terminals
Maximum cable cross-section 16 mm²   (AWG6)
Weight

12 V input and/or 12 V output models: 1,8 kg (3 lb)            

Other models: 1,6 kg (3.5 lb) 

Dimensions  (HxWxD)  130 x 186 x 80 mm  (5.1 x 7.3 x 3.2 inch)
Protection category IP43 (electronic components), IP22 (connection area)
Standards Safety EN 60950
Emission / Immunity EN 61000-6-3, EN 55014-1
Immunity EN 61000-6-2, EN 61000-6-1, EN 55014-2 
Automotive Directive ECE R10-5

1) If set to nominal or lower than nominal, the output voltage will remain stable within the specified input voltage range (buck-boost function). If the output voltage is set higher than nominal by a certain percentage, the minimum input voltage at which the output voltage remains stable (does not decrease) increases by the same percentage.  

Note 1: The VictronConnect App will not display current in or current out.  

Note 2: The Orion-Tr Smart is not equipped with a VE.Direct port. 

 

Specifications

SKU ORI121236120
Brand Victron
Unit Of Measure ea

Q: What size circuit breakers do I need for installation?

A: You will need a 60A Circuit Breaker (or fuse) on the input, and 40A on the output

Can’t Find answers to your questions?