COMBINED INVERTER AND CHARGER IN ONE

 

The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50 A resp. 100 A.

 

The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual

 

POWER CONTROL AND POWER ASSIST

A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).

 

PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. 

 

SOLAR ENERGY

The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. 

 

TWO AC OUTPUTS

The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

 

The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. 

 

VIRTUALLY UNLIMITED POWER THANKS TO PARALLEL AND THREE PHASE OPERATION

Up to 6 Multis can operate in parallel to achieve higher power output.

 

In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.

 

ON-SITE SYSTEM CONFIGERATION, MONITORING AND CONTROL

Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed).

 

Pair with the Cerbo GX and display for full monitoring and control.

 

REMOTE CONFIGERING AND MONITORING

Install a Cerbo GX to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. 

 

WHATS IN THE BOX

  • 1 x Victron Inverter-Charger  MultiPlus-II 24V / 3000VA /70A-32A 230V

 

5 YEAR MANUFACTURERS WARRANTY

  • 2400W Inverter
  • AC/DC Charger
  • Two AC Outputs
  • Parallel and Three Phase Operation
  • Built in automatc AC Transfer Switch

PRODUCT SPECIFICATIONS - VICTRON MULTIPLUS II

MODEL 12/3000/120-32 24/3000/70-32
SKU PMP122305010 PMP242305010
PowerControl & PowerAssist Yes
Transfer switch  32 A 
Maximum AC input current  32A
INVERTER
DC Input voltage range 12 V - 9,5–17 V  24 V - 19–33 V
Output Output voltage: 230 VAC ± 2 %          Frequency: 50 Hz ± 0,1 %   (1)
Cont. output power at 25 °C   (3)  3000 VA
Cont. output power at 25 °C 2400 W
Cont. output power at 40 °C 2200 W 
Cont. output power at 65 °C  1700 W
Max apparent feed-in power  3000 VA
Peak power 5500 W
Maximum efficiency  93% 94%
Zero load power  13W
Zero load power in AES mode 9W
Zero load power in Search mode 3W
CHARGER
AC Input 

Input voltage range: 187-265 

VAC Input frequency: 45 – 65 Hz

Charge voltage 'absorption'   14.4V 28.8V
Charge voltage 'float'  13.8V 27.6V
Storage mode 13.2V 26.4V
Max. battery charge current  (4) 120A 70A
Battery temperature sensor Yes
GENERAL
Auxiliary output  Yes (32 A) 
External AC current sensor (optional) 50 A or 100 A 
Programmable relay   (5)  Yes
Protection   (2)  a – g 
VE.Bus communication port  For parallel and three phase operation, remote monitoring and system integration 
General purpose com. port  Yes, 2x 
Remote on-off  Yes
Operating temperature range -40 to +65 °C (fan assisted cooling) 
Humidity (non-condensing)  max 95 % 
ENCLOSURE
Material & Colour  Steel, blue RAL 5012
Protection category  IP22
Battery-connection  M8 bolts 
230 VAC-connection  Screw terminals 13 mm² (6 AWG)
Weight  19 kg 
Dimensions (H x W x Dmm) 546 x 275 x 147  499 x 268 x 141 
STANDARDS
Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 
Emission, Immunity  EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 
1) Can be adjusted to 60 Hz 2) Protection key:     a) output short circuit     b) overload     c) battery voltage too high     d) battery voltage too low     e) temperature too high     f) 230 VAC on inverter output     g) input voltage ripple too high  3) Non-linear load, crest factor 3:1 4) Up to 25 °C ambient 5) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230V / 4 A, DC rating: 4 A up to 35VDC and 1 A up to 60 VDC 

 

Specifications

SKU PMP242305010
Barcode # 8719076048084
Brand Victron
Shipping Weight 21.0000kg
Shipping Width 0.580m
Shipping Height 0.350m
Shipping Length 0.240m
Shipping Cubic 0.048720000m3

Download