AllSpark Battery Slimline Tray - fits all models of AllSpark slimline batteries
$59.00
Need help?
(08) 6205 6868
SKU code: EN3DC40
Quantity:
Share This Item:
The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.
Let us know if you need help with the right fuses, circuit breakers or cables. We can supply the whole package for you. During normal operation the Enerdrive EN3DC40+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads. Multistage Charging Process The Enerdrive EN3DC40+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries. The Enerdrive EN3DC40+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array. As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages. Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible. Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge. Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply. Smart Charging Feature The Enerdrive EN3DC40+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so. Features Include: • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output • DC M6 screw terminals that will allow for large battery cable connection between all sources • A dedicated Maximum Power Point (MPPT) solar regulator • The same battery algorithms as included in the AC mains Enerdrive battery charger. GEL, AGM, Flooded, Lithium and the ability to create a full custom profile • Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W • 40A output up to 40+°C with thermo controlled fan cooling • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage • Temperature sensor included in charger for more accurate battery charging *See full terms/conditions over here
MANUAL WARRANTY
How much solar can I put through the EN3DC40+?
Up to 800W with high voltage panels (up to 45V open circuit), or up to 600W for regular panels (approx. 20V open circuit)
What size battery is this suitable for?
This unit is adjustable from 5 to 50Amps, so will suit any size battery bank. Keep in mind that the larger the battery/bank the slower they will charge, and be sure to check the charging rate on smaller batteries so as not to charge faster than the recommended rate. Also you will need to ensure that your vehicles alternator is able to handle the current draw required.
What size circuit breakers do I need for installation?
You will need a 60A and 70A circuit breaker for installation. We recommend circuit breakers over fuses as they are resettable and can be used for isolation. You can find the AllSpark Circuit Breakers over here.
What cable size do I need for installation?
Cable size will depend on the length between your DCDC and the battery. From 0-3m use 6B&S; 4m use 4B&S; 5m use 3B&S; 6m use 2B&S; 7-8M use 1B&S; 9-10m use 0B&S; 11 to 12m use 2/0B&S. Please see the table below for more information. please contact us if you require the cable to be pre-terminated.
Circuit Breakers - Surface Mount 60A
$49.00
Circuit Breakers - Flush Mount 60A
AllSpark 12V 2000 Watt PRO Series Pure Sine Wave Inverter
$639.00
AllSpark Insulated Copper Busbar 5 Tab Flush Mount
$22.00
Redarc Core 25 DC-DC Charger + Redarc Shunt + Bonus
RRP $763.00 $628.00
Victron Orion step down converter 48V/12V 30A
$349.00
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Offroad Living’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Offroad Living’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 2/29 Prestige Parade, Wangara WA 6065. Our ABN is 61 161 507 106. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website. We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement. We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system. Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us. You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen. If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.